Tile Doctor Pro-Clean - Professional Tile and Grout Cleaner - 1 litre

Product Information

I discussed with them the service we offered and gave them a price for the work, which they were happy to proceed with. We arranged a date to complete the work the following month. Cleaning Textured Porcelain Hallway and Kitchen Floor Tiles The new seal will make it easy for our customer to maintain the floor, making daily cleaning easier. It will also protect the stone against the nasty spillages that are common in kitchens and living rooms. Extract the soiled cleaning solution using a wetvacuum and then neutralisethefloor by rinsing with water again using a wet vacuum to remove as much water was possible after. (Any cleaning productsleft on the surface may impact the performance of the sealer). Allow the tilestodry out for at least 12 hours or more. As you can see from the pictures, the lustre has been completely restored to the Slate tiles and the sealer will allow for easy maintenance for the customer in the future.

Tile Doctor Remove and Go is very effective at removing impregnating sealers and can be applied undiluted and used in the same way as Pro-Clean. It's worth noting that Pro-Clean is better with the removal of topical sealers however if you are unable to determine which sealer has been used previously then you may need to utilise both products. After sufficient scrubbing, we were satisfied that all of the soil was broken up, we then machine flushed and vacuumed the cleaning product and dirt away from the floor. As these tiles are factory sealed there is no need to apply a sealant. The client was very happy with the result and felt they could now keep on top of keeping it clean and looking fresh moving forward. They could now remove the rugs too! If you require a free quotation to clean and seal your stone floors do get in touch. Approximately 5m² to 53m² (54 to 572 sq. ft.) per 1 litre bottle depending on dilution. Precautions

Sealing a Victorian Encaustic Cement Tiled Hallway Floor

Once the floor has been cleaned and dried apply Tile Doctor Seal & Go sealer with a paint-pad applicator and tray. terracotta tiles typically require between 6 and 8 coats of sealant, always allow to dry before applying the next coat. Maintenance Cleaning This customer in Crediton originally enquired about grout cleaning for their Kitchen floor, however after speaking to them on the phone I discovered their tiles where Marble and so I suggested they may be interested in our stone polishing service as well.

As you can see from the pictures, the restoration has restored the lustre and colour of the Terracotta and the grout looks much cleaner; the very happy customer can be assured that maintaining the condition of the Terracotta will be much easier in the future.

Apply a small amount of remover to a small area of up to 2m² (25 sq. ft.), spread with a sponge or scrub brush and allow to stand for 10 to 15 minutes without drying or until coating or residue softens, do not allow stripper to to dry on surface. The client was delighted with the work we had carried out, the kitchen had been transformed and were now confident they could maintain it. If you would like a no obligation quotation to clean your natural stone or ceramic tiled floor, please get in touch. My customer was very happy with the transformation and with the summer just around the corner can now enjoy their freshly laid Limestone patio in all its glory. More importantly it is now sealed and protected against future elements.